Partial rewire during renovations

If you’re renovating a certain area of your house, such as installing a kitchen, erecting cables is often recommended. In the end, it is easier and more cost-effective to replace electrics while the walls and unfinished work are still exposed in a certain area, such as the kitchen.

Partial rewire due to damaged electrics

A partial rewire is also recommended if your house has been damaged in an area. Partial rewiring may be recommended if the electrical system is in relatively good shape and the rest of the installation is new. Your electrician will determine this after performing an electrical inspection, also known as EICR. It is an in-depth inspection that gives you full information on your fixed electric installation. For an Electrician Gloucester, visit D Palmer.

• Water leak– In the event that your house has been affected by a water or flood leak, it is likely your electrical system will be damaged. It will be necessary to replace your current electrics. After a flood, an electrician will have to examine the electrics. Water and electricity don’t mix well. A partial rewire is an option if the damages are limited to a single area, like a bathroom. An Electrician Gloucester can help.
• Overload– When your electrical wiring is overloaded, it can get hot. The PVC can become more brittle, increasing the fire risk. The high power demands of newer homes can cause overload on old electrical wiring. It can also happen when amateurs try to install the wrong hardware.
• Faulty or loose connections– You are at risk for electrical shocks and fires if you have loose connections. These problems are often caused by amateur rewiring of parts of the home, usually during renovations to bathrooms or kitchens. If only one room needs to be rewired, a partial rewire is the most cost-effective solution.